# Sample configuration file for ISC dhcpd
#


# This is a very basic subnet declaration.

#subnet 10.254.239.0 netmask 255.255.255.224 {
#  range 10.254.239.10 10.254.239.20;
#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
#}

option rfc3442-classless-static-route code 121 = array of integer 8;
subnet 192.168.0.0  netmask 255.255.240.0 {
  range 192.168.10.20 192.168.10.40;
  #option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
  option rfc3442-classless-static-route 24, 172, 16, 2, 0, 192, 168, 10, 254;
}

option rfc3442-classless-static-route code 121 = array of integer 8;
subnet 172.16.2.0  netmask 255.255.255.0 {
  range 172.16.2.1 172.16.2.253;
  option rfc3442-classless-static-route 20, 192, 168, 0, 172, 16, 2, 254;
}
# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {
#  range dynamic-bootp 10.254.239.40 10.254.239.60;
#  option broadcast-address 10.254.239.31;
#  option routers rtr-239-32-1.example.org;
#}

# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
#  range 10.5.5.26 10.5.5.30;
#  option domain-name-servers ns1.internal.example.org;
#  option domain-name "internal.example.org";
#  option routers 10.5.5.1;
#  option broadcast-address 10.5.5.31;
#  default-lease-time 600;
#  max-lease-time 7200;
#}

# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

host GW1 {
  hardware ethernet 42:00:aa:00:00:04;
  fixed-address 172.16.2.254;
}

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
host GW2 {
  hardware ethernet 42:00:aa:00:00:03;
  fixed-address 192.168.10.254;
}