Refactor project scripts for Windows and Linux: update paths and create new scripts for build, clean, simulate, and GTKWave functionalities.

Semaine_5/DHT11_LEDS/project.bat

@@ -1,6 +1,6 @@
 @call c:\oss-cad-suite\environment.bat 
 @echo off
-if "%1"=="sim" call scripts\simulate.bat
-if "%1"=="wave" call scripts\gtkwave.bat
-if "%1"=="clean" call scripts\clean.bat
-if "%1"=="build" call scripts\build.bat
+if "%1"=="sim" call scripts\windows\simulate.bat
+if "%1"=="wave" call scripts\windows\gtkwave.bat
+if "%1"=="clean" call scripts\windows\clean.bat
+if "%1"=="build" call scripts\windows\build.bat

Semaine_5/DHT11_LEDS/project.sh

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# Charger l'environnement OSS CAD Suite
+source /home/louis/oss-cad-suite/environment
+
+case "$1" in
+  sim)
+    bash scripts/linux/simulate.sh
+    ;;
+  wave)
+    bash scripts/linux/gtkwave.sh
+    ;;
+  clean)
+    bash scripts/linux/clean.sh
+    ;;
+  build)
+    bash scripts/linux/build.sh
+    ;;
+  *)
+    echo "Usage: $0 {sim|wave|clean|build}"
+    ;;
+esac

Semaine_5/DHT11_LEDS/scripts/linux/build.sh

@@ -0,0 +1,46 @@
+#!/bin/bash
+
+# Aller à la racine du projet
+cd "$(dirname "$0")/../.." || exit 1
+
+# Config de base
+DEVICE="GW2AR-LV18QN88C8/I7"
+BOARD="tangnano20k"
+TOP="top_uart_ultrason_command"
+CST_FILE="$TOP.cst"
+JSON_FILE="runs/$TOP.json"
+PNR_JSON="runs/pnr_$TOP.json"
+BITSTREAM="runs/$TOP.fs"
+
+# Créer le dossier runs si nécessaire
+mkdir -p runs
+
+echo "=== Étape 1 : Synthèse avec Yosys ==="
+yosys -p "read_verilog -sv src/verilog/$TOP.v IP/verilog/ultrasonic_fpga.v IP/verilog/uart_tx_fifo.v IP/verilog/uart_rx_fifo.v IP/verilog/rxuartlite.v IP/verilog/fifo.v IP/verilog/uart_tx.v; synth_gowin -top $TOP -json $JSON_FILE"
+if [ $? -ne 0 ]; then
+  echo "=== Erreur lors de la synthèse ==="
+  exit 1
+fi
+
+echo "=== Étape 2 : Placement & Routage avec nextpnr-himbaechel ==="
+nextpnr-himbaechel --json "$JSON_FILE" --write "$PNR_JSON" --device "$DEVICE" --vopt cst=constraints/"$CST_FILE" --vopt family=GW2A-18C
+if [ $? -ne 0 ]; then
+  echo "=== Erreur lors du placement/routage ==="
+  exit 1
+fi
+
+echo "=== Étape 3 : Packing avec gowin_pack ==="
+gowin_pack -d "$DEVICE" -o "$BITSTREAM" "$PNR_JSON"
+if [ $? -ne 0 ]; then
+  echo "=== Erreur lors du packing ==="
+  exit 1
+fi
+
+echo "=== Étape 4 : Flash avec openFPGALoader ==="
+openFPGALoader -b "$BOARD" "$BITSTREAM"
+if [ $? -ne 0 ]; then
+  echo "=== Erreur lors du flash ==="
+  exit 1
+fi
+
+echo "=== Compilation et flash réussis ==="

Semaine_5/DHT11_LEDS/scripts/linux/clean.sh

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+echo "=== Nettoyage des fichiers générés ==="
+rm -rf runs/*

Semaine_5/DHT11_LEDS/scripts/linux/gtkwave.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+echo "=== Lancement de GTKWave ==="
+gtkwave runs/ultrason_commands.vcd
+echo "=== GTKWave terminé ==="

Semaine_5/DHT11_LEDS/scripts/linux/simulate.sh

@@ -0,0 +1,17 @@
+#!/bin/bash
+
+echo "=== Simulation avec Icarus Verilog ==="
+
+OUT="runs/sim.vvp"
+TOP="tb_ultrason_commands"
+DIRS=("src/verilog" "tests/verilog" "IP/verilog")
+
+FILES=()
+for dir in "${DIRS[@]}"; do
+  for file in "$dir"/*.v; do
+    FILES+=("$file")
+  done
+done
+
+iverilog -g2012 -o "$OUT" -s "$TOP" "${FILES[@]}"
+vvp "$OUT"